Fitting Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the door glass is securely fit into the door glass rubber run channel.
- Lower the door glass slightly [approximately 10 to 20 mm (0.39 to 0.79 in)], and check that the clearance to the rubber run is parallel. If the clearance between the door glass and rubber run is not parallel, loosen the door regulator bolts, door glass run bolt, and door glass regulator to door glass bolts to correct the door glass position.