Fitting Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the door glass is fit securely into the door glass rubber run groove.
- Lower the door glass slightly [approximately 10 to 20 mm (0.39 to 0.79 in)] and check that the clearance to the door glass rubber run is parallel. If the clearance between the glass and door glass rubber run is not parallel, loosen the door glass regulator nuts, door glass front run bolt, and door glass regulator to door glass bolts to correct the glass position.