Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- SELF DIAGNOSTIC RESULT
CONSULT
- Start the engine.
- Turn the Blind Spot Warning system ON, and then wait for 30 seconds or more.
- Perform "ALL DTC READING" mode.
- Check if "U1000" is detected as the current malfunction in "Self Diagnostic Result" mode of "SIDE RADAR LEFT".
Is "U1000" detected?
YES
Refer to Trouble Diagnosis Flow Chart .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.