Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTOR
- Turn the ignition switch OFF.
- Check the terminals and connectors of the side radar RH for damage, bend and short (unit side and connector side).
Is the inspection result normal?
YES
GO TO 2 .
NO
Repair the terminal or connector.
- CHECK CONTINUITY RIGHT/LEFT SWITCHING SIGNAL CIRCUIT
- Disconnect side radar RH connector.
- Check continuity between side radar RH harness connectors and ground.
Side radar RH
Ground
Continuity
Connector
Terminal
C117
3
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Repair harness or connector.