Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK POWER SUPPLY
- Turn ignition switch OFF.
- Disconnect sunshade motor assembly connector.
- Turn ignition switch ON.
- Check voltage between sunshade motor assembly harness connector and ground.
(+)
(-)
Voltage
(Approx.)
Sunshade motor assembly
Connector
Terminal
R102
6
Ground
Battery voltage
Is the inspection result normal?
YES
GO TO 2 .
NO
Repair or replace the harness.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Check continuity between sunshade motor assembly harness connector and ground.
Sunshade motor assembly
Ground
Continuity
Connector
Terminal
R102
1
Yes
Is the inspection result normal?
YES
Replace sunshade motor assembly. Refer to Removal and Installation .
NO
Repair or replace the harness.