Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MOONROOF SWITCH INPUT SIGNAL

Turn ignition switch ON.

Check voltage between moonroof motor assembly harness connector and ground.

(+)		(-)	Condition	Voltage (Approx.)
Moonroof motor assembly
Connector	Terminals
R101	5	Ground	Moonroof switch is operated OPEN (1st)	0
			Other than above	Battery voltage
	10		Moonroof switch is operated CLOSE (1st)	0
			Other than above	Battery voltage
	2		Moonroof switch is operated OPEN or CLOSE (2nd)	0
			Other than above	Battery voltage
	4		Moonroof switch is operated TILT UP or TILT DOWN (2nd click to close sunshade)	0
			Other than above	Battery voltage

Is the inspection result normal?

YES

Inspection End.

GO TO 2 .

CHECK MOONROOF SWITCH CIRCUIT

Turn ignition switch OFF.
Disconnect moonroof motor assembly connector and moonroof switch connector.

Check continuity between moonroof motor assembly harness connector and moonroof switch harness connector.

Moonroof motor assembly		Moonroof switch		Continuity
Connector	Terminal	Connector	Terminal
R101	4	R6	11	Yes
	10		9
	5		4
	2		6

Check continuity between moonroof motor assembly harness connector and ground.

Moonroof motor assembly		Ground	Continuity
Connector	Terminal
R101	4		No
	10
	5
	2

Is the inspection result normal?

YES

GO TO 3 .

Repair or replace the harness.

CHECK MOONROOF SWITCH GROUND CIRCUIT

Check continuity between moonroof switch harness connector and ground.

Moonroof switch		Ground	Continuity
Connector	Terminal
R6	1		Yes

Is the inspection result normal?

YES

GO TO 4 .

Repair or replace the harness.

CHECK MOONROOF SWITCH
Check moonroof switch.

Refer to Component Inspection .

Is the inspection result normal?

YES

GO TO 5 .

NO

Replace moonroof switch. Refer to Removal and Installation .
CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident .

Inspection End.