Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Brush away all loose dirt from the around the area of the air handling connections to avoid contamination of the interior of the engine.

Remove the EGR cooler assembly. Refer to Removal and Installation .
Remove the bolts (A) and separate the EGR valve (3) from the EGR cooler assembly (1).

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not reuse the EGR valve gasket (4) or O-rings (2).