Inspection After Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the crankshaft position sensor for debris, cracks, or damage from contact with the tone wheel.
- If there is debris on the crankshaft position sensor, clean the sensor.
- Inspect the engine harness connector and sensor for the following:
- Cracked or broken connector shell
- Missing or damaged connector seals
- Dirt, debris, or moisture in or on the connector pins
- Corroded, bent, broken, pushed back, or expanded pins
- Chipped, cracked, extruded, or damaged sensor.
- Repair or replace parts as necessary.
- Inspect the crankshaft position sensor O-ring for the following:
- Swollen O-ring
- Nicks or cuts in or on the O-ring.