Inspection After Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- Do not exceed 207 kPa (2.111 kg/cm 2 , 30 psi).
- Wear appropriate eye protection and protective clothing including gloves.
- Inspect all crankcase breather tubes internally for obstructions or sludge buildup.
- If a tube is blocked, it must be cleaned with a strong solution of detergent or replaced to prevent excess crankcase pressure buildup.
- Dry the crankcase breather tube with compressed air.
- Check the crankcase breather tubes for cracks. Replace any damaged crankcase breather tubes.
WARNING:
When using compressed air for cleaning, to avoid the risk of personal injury from flying debris and dirt: