Jigs For Replacement

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Check if the following Tools are prepared.

Remover puller

Courtesy of NISSAN NORTH AMERICA, INC.

Tool	:- - (J-51269-1)

(A)	: Tool inner
(B)	: Nut
(C)	: Tool outer
(D)	: Bolt
(E)	: Pin gauge (6.050 mm)
(F)	: Suitable tool

Alignment fixture

Courtesy of NISSAN NORTH AMERICA, INC.

Tool	:- - (J-51269-2)

(A)	: Tool base
(B)	: Bolt