LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Engine Mechanical (5.6L)) >> Periodic Maintenance >> Drive Belt Routing >> Checking

Drive Belt Routing: Checking

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Be sure to perform the these steps when engine is stopped.
  1. Check that the indicator (C) (notch on fixed side) of each auto-tensioner is within the possible use range (A).
    NOTE:
    • Check the each auto-tensioners indication when the engine is cold.
    • When new drive belts is installed, the indicator (notch on fixed side) should be within the range (B) in the figure.
  2. Visually check all drive belts for wear, damage or cracks.
  3. If the indicator (notch on fixed side) is out of the possible use range or drive belts are damaged, replace drive belts.
scientia non olet · About LEMON Manuals