LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Audio, Visual & Navigation System) >> Navigation Without Amplifier >> DTC/Circuit Diagnosis >> Rear Door Speaker >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to the appropriate Wiring Diagram .

  1. CONNECTOR CHECK 

    Check the AV control unit and speaker connectors for the following:

    • Proper connection
    • Damage
    • Disconnected or loose terminals

    Is the inspection result normal?

    YES

    GO TO 2 .

    NO

    Repair the terminals or connectors.

  2. CHECK REAR DOOR SPEAKER SIGNAL CIRCUIT CONTINUITY 
    1. Disconnect AV control unit connector M97 and suspect rear door speaker connector.
    2. Check continuity between audio unit connector M171 and suspect rear door speaker connector.
      CREW CAB

      Audio unit

      Rear door speaker

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M171

      4

      D207 (LH)

      1

      Yes

      5

      2

      13

      D307 (RH)

      1

      14

      2

      KING CAB®

      Audio unit

      Rear door speaker

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M171

      4

      B4 (LH)

      1

      Yes

      5

      2

      13

      B120 (RH)

      1

      14

      2

    3. Check continuity between AV control unit connector M97 and ground.

      AV control unit

      Ground

      Continuity

      Connector

      Terminal

      M97

      4

      -

      No

      5

      13

      14

    Is the inspection result normal?

    YES

    GO TO 3 .

    NO

    Repair or replace harness or connectors.

  3. CHECK REAR DOOR SPEAKER SIGNAL 
    1. Connect AV control unit connector M97 and suspect rear door speaker connector.
    2. Turn ignition switch to ACC.
    3. Push AV control unit POWER switch.
    4. Check signal between AV control unit connector M97 and ground.

      AV control unit connector M97

      Condition

      Reference value

      (+)

      (-)

      Terminal

      Terminal

      4

      5

      Audio signal output

      G04084885Courtesy of NISSAN NORTH AMERICA, INC.

      13

      14

    Is the inspection result normal?

    YES

    Replace rear door speaker. Refer to Removal and Installation .

    NO

    Replace AV control unit. Refer to Removal and Installation .