Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to the appropriate Wiring Diagram .

CHECK FUSE

Check that the following fuses are not blown.

Terminal No.	Signal name	Fuse No.
1	Battery power supply	12 (15A)
17	Battery power supply	11 (15A)

Are the fuses blown?

YES

Replace the blown fuse after repairing the affected circuit.

GO TO 2 .

CHECK POWER SUPPLY CIRCUIT

Turn ignition switch OFF.
Disconnect audio amp. connector M112.

Check voltage between audio amp. connector M112 and ground.

Audio amp.		Ground	Condition	Voltage (Approx.)
Connector	Terminal
M112	1	-	Ignition switch: OFF	Battery voltage
	17

Is the inspection result normal?

YES

GO TO 3 .

Repair or replace harness or connectors.

CHECK GROUND CIRCUIT

Check continuity between audio amp. connector M112 and ground.

Audio amp.		Ground	Continuity
Connector	Terminal
M112	4	-	Yes
	20

Is the inspection result normal?

YES

Inspection End.

Repair or replace harness or connectors.