Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be careful not to release the spring when installing the sunshade.

Wind the shade around the core post.
Insert the round end of the shade (front - black curved rail) into the sunshade carrier assembly.
Using a suitable tool, wind the double-D tang end 20 turns counter-clockwise (when viewed from the end).
Insert the double-d tang end into the slot and lock it into the carrier.
Position the sunshade carrier assembly and install the bolts.
Position the center brackets (LH/RH) and install the bolts and nuts.
Install the side curtain air bag module bolts. Refer to Explode View .
Install the headliner. Refer to Removal and Installation .