Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before installing the sunshade motor assembly, be sure to the place the link and wire assembly in the symmetrical and fully closed position.
- Move the sunshade motor assembly laterally so that the gear is completely engaged into the wire on the moonroof unit assembly frame, and mounting surface becomes parallel.
- Install and tighten sunshade motor assembly screws.
- Connect the harness connector to the sunshade motor assembly.
- Install the headlining. Refer to Removal and Installation .
- Perform initilization procedure. Refer to Special Repair Requirement .