Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wind deflector. Refer to Removal and Installation .
- Tape down the glass lid weatherstrip along the front moonroof glass with protective tape.
- Apply protective tape around the front moonroof glass to protect the surface from damage.
- Cut adhesive.
- Pass piano wire through the adhesive with a wire pierce.
- Tie piano wire on both ends to assist in wire grip.
- Pull piano wire with a sawing motion to cut through the adhesive.
- Remove the front moonroof glass.