LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Power Moonroof) >> Basic Inspection >> Inspection And Adjustment >> Special Repair Requirement >> Anti-Pinch Function

Anti-Pinch Function

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully open the moonroof.
  2. Place a piece of wood near the fully closed position.
  3. Close the moonroof completely with auto-slide close function.
  4. Check that moonroof lowers for approximately 150mm (5.91 in) or 2 seconds without pinching a piece of wood and stop.
  5. Fully open sunshade.
  6. Place a piece of wood near fully closed position.
  7. Close the sunshade completely with the auto slide close.
  8. Check that sunshade lowers for approximately 150mm (5.91 in) or 2 seconds without pinching a piece of wood and stop.
CAUTION:
  • Do not test the anti-pinch function with your hands or other body parts because they may be pinched.
  • Depending on the environment and driving conditions, if a similar impact or load is applied to the moonroof it may lower.
  • Test the auto-slide operation before inspection when the initialization procedure is performed.
  • Perform the initialization procedure when the auto-slide operation or anti-pinch function does not operate normally.
scientia non olet · About LEMON Manuals