LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Exterior Lighting System - Halogen Headlamp) >> Unit Disassembly And Assembly >> Front Combination Lamp >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front combination lamp. Refer to Removal and Installation .
  2. Rotate headlamp (low beam) bulb counterclockwise and remove.
  3. Disconnect the harness connector from the headlamp (low beam) bulb.
  4. Rotate headlamp (high beam) bulb counterclockwise and remove.
  5. Disconnect the harness connector from the headlamp (high beam) bulb.
  6. Rotate side marker lamp bulb socket counterclockwise and remove.
  7. Remove side marker lamp bulb from bulb socket.
  8. Rotate turn signal lamp bulb socket counterclockwise and remove.
  9. Remove turn signal lamp bulb from bulb socket.
scientia non olet · About LEMON Manuals