LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Door & Lock (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COMBINATION METER INPUT SIGNAL 

    SYMBOL CONSULT

    Select the "Data Monitor" mode of the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER

    Under the condition of buzzer input

    : On

    Except above

    : Off

    Is the inspection result normal?

    YES

    Replace combination meter. Refer to Removal and Installation .

    NO

    Replace BCM. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals