Component Function Check

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

Check Intelligent Key relative signal strength.
Confirm vehicle Intelligent Key antenna signal strength.

CHECK FUNCTION

CONSULT

Select "INTELLIGENT KEY" of "BCM".
Select "RKE OPE COUN1" in "Data Monitor" mode.
Check that the function operates normally according to the following conditions:

Monitor Item	Condition
RKE OPE COUN1	Check that the numerical value is changing while operating the Intelligent Key.

Is the inspection result normal?

YES

Intelligent Key is OK.

Refer to Diagnosis Procedure .