LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Security Control System) >> Removal And Installation >> NATS Antenna Amp. >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery or batteries. Refer to Battery Disconnect .
  2. Remove the cluster lid C finisher (LH). Refer to Removal and Installation .
  3. Disconnect the harness connectors from the NATS antenna amp. and push-button ignition switch.
  4. Remove the NATS antenna amp. and push-button ignition switch (1).
    GNSALKIA4174Z-174Courtesy of NISSAN NORTH AMERICA, INC.
  5. Release the pawls and separate the push-button ignition switch (1) from the NATS antenna amp. (2).
    GNSALKIA4175Z-175Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals