Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Diagnosis Procedure .
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure .
GO TO 2 .
- CHECK INTELLIGENT KEY OUTPUT SIGNAL
Use SIGNAL TECH II to check Intelligent Key output signal. For the inspection method and how to use SIGNAL TECH II, refer to "NISSAN/INFINITI SIGNAL TECH II USER GUIDE".
Is the inspection result normal?
YES
GO TO 3 .
NO
Replace Intelligent Key.
- REGISTER INTELLIGENT KEY
- Register the Intelligent Key again.
- Check operation after replacement.
Is the inspection result normal?
YES
Inspection End.
NO
GO TO 4 .
- REPLACE INTELLIGENT KEY
- Replace the Intelligent Key and perform registration again.
- Check operation after replacement.
Is the inspection result normal?
YES
Inspection End.
NO
GO TO 5 .
- REPLACE BCM
- Replace BCM. Refer to Removal and Installation .
- Check operation after replacement.
Is the inspection result normal?
YES
Inspection End.
NO
Check intermittent incident. Refer to Intermittent Incident .