Removal and Installation

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Release lock knob on back of Intelligent Key and remove key.
Insert a suitable tool (A) wrapped with a cloth into slit of corner and twist it to separate upper part from lower part.

Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:
- Do not insert a tool into notches of Intelligent Key to pry it open as this may damage circuit board.
- Do not use excessive force when opening Intelligent Key as this may result in damage to internal components.
- Do not touch circuit board or battery terminal.
- Key fob is water-resistant. However, if it does get wet, immediately wipe it dry.

Replace battery with a new one.

Battery replacement

:Coin-type lithium battery (CR2032)

Align tips of upper and lower parts, and then push them together until unit is securely closed.

Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:
- When replacing battery, keep dirt, grease, and other foreign materials off electrode contact area.
- After replacing battery, check that all Intelligent Key functions work normally.