Hood Stay: Disposal
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Fix hood stay (1) using a vise (C).
- Using a hacksaw (A), slowly make two holes in hood stay (1) in numerical order as shown in figure.CAUTION:
- When cutting a hole in hood stay (1), always cover hacksaw (A) with a shop cloth (B) to avoid scattering metal fragments or oil.
- Wear eye protection (safety glasses).
- Wear gloves.
A:
20 mm (0.79 in)
B:
Cut at groove.