Component Inspection (Inverter Relay)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK INVERTER RELAY
- Turn ignition switch OFF.
- Disconnect inverter relay connector.
- Apply battery voltage to inverter relay terminal 1 and ground to terminal 2.
- Check continuity between inverter relay terminals 3 and 5.
Inverter relay terminals
Condition
Continuity
3 and 5
Battery voltage applied to terminal 1 and ground to terminal 2
Yes
Voltage and ground removed
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace inverter relay.