Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUSE
Check that the following fuse is not blown:
Signal name
Fuse No.
Ignition switch ON or START
29 (5A)
Is the fuse blown?
YES
Replace the blown fuse after repairing the affected circuit.
NO
GO TO 2.
- CHECK POWER SUPPLY FOR AC 120V OUTLET MAIN SWITCH
- Turn ignition switch ON.
- Check for voltage between the AC 120V outlet main switch connector M139 and ground.
AC 120V outlet main switch
Ground
Condition
Voltage
(Approx.)
Connector
Terminal
M139
2
-
Ignition switch ON
Battery voltage
Ignition switch OFF
0V
Is the inspection result normal?
YES
Inspection End.
NO
Repair or replace the AC 120V main switch power supply circuit.