Diagnosis Procedure (150W Indicator)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK POWER SUPPLY FOR AC 120V OUTLET MAIN SWITCH INDICATOR
- Turn ignition switch ON.
- Check for voltage between the AC 120V outlet main switch connector M139 and ground.
AC 120V outlet main switch
Ground
Condition
Voltage
(Approx.)
Connector
Terminal
M139
6
-
Ignition switch ON
Battery voltage
Ignition switch OFF
0V
Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace the AC 120V outlet main switch indicator power supply circuit.
- CHECK AC 120V OUTLET MAIN SWITCH 150W INDICATOR GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect AC 120V outlet main switch connector M139 and inverter unit connector B2.
- Check continuity between AC 120V outlet main switch connector M139 and inverter unit connector B2.
AC 120V outlet main switch
Inverter unit
Continuity
Connector
Terminal
Connector
Terminal
M139
7
B2
11
Yes
Is the inspection result normal?
YES
Replace AC 120V outlet main switch. Refer to Removal and Installation .
NO
Repair or replace the AC 120V outlet main switch 150W indicator ground circuit.