Component Inspection (AC 120V Outlet Main Switch Indicators)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AC 120V OUTLET MAIN SWITCH INDICATORS
- Turn ignition switch OFF.
- Disconnect AC 120V outlet main switch connector M139.
- Apply battery voltage to AC 120V outlet main switch terminal 6 and ground to terminal 7.
AC 120V outlet main switch terminals
Condition
150W indicator
6 and 7
Battery voltage applied to terminal 6 and ground to terminal 7
ON
Voltage and ground removed
OFF
- Apply battery voltage to AC 120V outlet main switch terminal 6 and ground to terminal 3.
AC 120V outlet main switch terminals
Condition
400W indicator
6 and 3
Battery voltage applied to terminal 6 and ground to terminal 3
ON
Voltage and ground removed
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Replace AC 120V outlet main switch. Refer to Removal and Installation .