LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Exterior) >> Removal And Installation >> Side Step >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector from the side step.
  2. Remove side step bolts, and then remove side step from side step bracket.
  3. Remove side step bracket nut and bolt, then remove side step bracket.
  4. Remove side step end cap (if necessary).
    NOTE: Side step end caps are not installed on all styles of side steps.
scientia non olet · About LEMON Manuals