Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The roof side molding (LH/RH) are affixed with double-faced adhesive tape.
- To re-use existing molding, clean all double-faced adhesive tape from molding and apply new double-faced adhesive tape to the molding.
- Remove tape and clean surface with isopropyl alcohol or equivalent to degrease surface.
- Align clips and install roof side molding, put pressure on double sided tape to secure fit.CAUTION:
- Use double-faced adhesive tape.
- Do not wash vehicle within 24 hours of installation, to secure contact.