Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ECV (ELECTRICAL CONTROL VALVE)
- Turn ignition switch OFF.
- Disconnect A/C compressor connector.
- Check continuity between A/C compressor connector F10 terminals.
Terminals
Condition
Resistance (kΩ)
Temperature: °C (°F)
3
4
20 (68)
10.1 - 11.1
Is the inspection result normal?
YES
Inspection End.
NO
Replace A/C compressor. Refer to Removal and Installation .