Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF DIAGNOSTIC RESULT
CONSULT
- Turn ignition switch ON.
- Select "Self Diagnostic Result" mode of "HVAC".
- Touch "ERASE".
- Turn ignition switch OFF.
- Turn ignition switch ON.
- Perform "DTC CONFIRMATION PROCEDURE". Refer to DTC Description .
Is DTC detected again?
YES
Replace A/C auto amp. Refer to Removal and Installation .
NO
Inspection End.