LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Wheel And Tire System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BCM 

    Check BCM harness connector for disconnection or deformation.

    Is the inspection result normal?

    YES

    Replace BCM. Refer to Removal and Installation .

    NO

    Repair or replace malfunctioning components.

scientia non olet · About LEMON Manuals