Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS sensor IDs
- Display tire pressure reported by the TPMS sensor
- Read TPMS DTCs
- Register TPMS sensor IDs
- TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Refer to Work Procedure .
Can the tire pressure sensor ID registration be completed?
YES
GO TO 2 .
NO
Replace applicable tire pressure sensor. Refer to Removal and Installation .
- CHECK TIRE PRESSURE SIGNAL
With CONSULT
- Adjust tire pressure for all wheels to the specified value. Refer to Tire .
- Select "Data Monitor" mode in "AIR PRESSURE MONITOR" of "BCM".
- Check that the air pressures match the specified value.
Monitor item
Displayed value
AIR PRESS FL
Approximately equal to specified value. Refer to Tire .
AIR PRESS FR
AIR PRESS RR
AIR PRESS RL
Is the inspection result normal?
YES
Inspection End.
NO
Replace BCM. Refer to Removal and Installation .