LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Rear Suspension) >> Removal And Installation >> Rear Suspension Arm >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support rear lower link with a suitable jack.
    WARNING: Place a suitable jack under outer end of rear lower link.
    CAUTION: Do not damage rear lower link with suitable jack.
  2. Remove rear suspension arm nut and bolt at rear suspension member.
    CAUTION: Do not reuse rear suspension arm nut.
  3. Remove rear suspension arm nut and bolt at rear knuckle.
    CAUTION: Do not reuse rear suspension arm nut.
  4. Remove rear suspension arm from vehicle.
scientia non olet · About LEMON Manuals