LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Rear Suspension) >> Removal And Installation >> Rear Stabilizer >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove nuts and remove stabilizer connecting rod (LH/RH).
  2. Remove bolts and remove stabilizer clamp (LH/RH).
  3. Remove the rear stabilizer.
  4. If necessary, remove rear stabilizer bushing (LH/RH).
scientia non olet · About LEMON Manuals