LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Rear Suspension) >> Removal And Installation >> Rear Lower Link Coil Spring >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear suspension assembly. Refer to Removal and Installation .
  2. Remove front and rear lower link bolts from knuckles.
    CAUTION:
    • Do not reuse the rear lower link nuts.
    • Do not reuse the front lower link nuts.
  3. Remove coil spring lower rubber seat.
  4. Remove front and rear lower link nuts and bolts from rear suspension member.
    CAUTION:
    • Do not reuse the rear lower link nuts.
    • Do not reuse the front lower link nuts.
  5. Remove front lower link to rear lower link bolts (A) and separate.
    GNSDB120649Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals