LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Front Suspension) >> Removal And Installation >> Steering Knuckle >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel hub and bearing. Refer to Removal and Installation .
  2. Remove cotter pin from outer socket stud.
  3. Loosen outer socket nut and separate outer socket from steering knuckle using suitable tool.
    CAUTION: Leave outer socket nut half threaded on outer socket to prevent damage to threads and to prevent suitable tool from coming off suddenly.
  4. Remove outer socket nut and separate outer socket from steering knuckle. Refer to Exploded View .
  5. Remove front strut bolts at steering knuckle. Refer to Exploded View .
  6. Remove steering knuckle lower pinch bolt and nut and separate transverse link from steering knuckle.
  7. Remove steering knuckle.
scientia non olet · About LEMON Manuals