Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
CAUTION:
Do not reuse lower strut nuts.
- Be sure tab (A) on strut mount insulator is positioned as shown.
: Front
- Be sure lower strut nuts (A) are facing front of vehicle.
: Front
- Check wheel alignment. Refer to Inspection .
- Adjust neutral position of steering angle sensor. Refer to Description (without ICC) Description (with ICC).
- After replacing strut, follow disposal procedure to discard old strut. Refer to Disposal .