Preliminary Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Always adjust wheel alignment with vehicle on a flat surface.

NOTE: If wheel alignment is out of specification, inspect and replace any damaged or worn suspension parts before making any adjustments.

Check the following:

Check and adjust wheel alignment with vehicle under unladen conditions. "Unladen conditions" means that fuel, engine coolant, and lubricants are full; spare tire, jack, hand tools and mats are in designated positions.
Check tires for incorrect air pressure and excessive wear. Refer to Tire .
Check wheels for deformation, cracks, and other damage. Remove wheel and check wheel runout. Refer to Inspection .
Check wheel bearing axial end play. Refer to Inspection .
Check struts for leaks or damage.
Check each mounting point of suspension components for any excessive looseness or damage.
Check each link, arm, and suspension member for any damage.
Check wheelarch height in unladen conditions. Refer to Wheelarch Height (Unladen*) .