LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Body Control System) >> System Description >> Diagnosis System (BCM) >> Head Lamp >> CONSULT Function (BCM - HEAD LAMP) >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push button ignition switch

ENGINE STATE [Stop/Stall/Crank/Run]

Indicates engine status received from ECM on CAN communication line

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line

TURN SIGNAL R [On/Off]

Indicates condition of combination switch

TURN SIGNAL L [On/Off]

TAIL LAMP SW [On/Off]

HI BEAM SW [On/Off]

HEAD LAMP SW 1 [On/Off]

HEAD LAMP SW 2 [On/Off]

PASSING SW [On/Off]

AUTO LIGHT SW [On/Off]

FR FOG SW [On/Off]

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH

DOOR SW-BK [On/Off]

Indicates condition of trunk switch

OPTI SEN (DTCT) [V]

Indicates voltage signal from optical sensor

OPTI SEN (FILT) [V]

Indicates voltage signal from optical sensor

OPTICAL SENSOR [On/Off]

Indicates condition of optical sensor