Component Function Check

CONSULT

1. Select "FUEL METER" in "Data Monitor" mode of "METER/M&A".
2. Compare the "FUEL METER" value and the fuel gauge reading of the combination meter. Fuel gauge and data monitor indications should be close.

   Fuel gauge pointer	Fuel tank volume [L] (Approx.)
   Full	105.8
   3/4	79.35
   1/2	52.90
   1/4	26.45
   Empty	0.0

Does the data monitor value approximately match the fuel gauge indication?

YES

Inspection End.

NO

Replace combination meter. Refer to Removal and Installation .