Component Description
|
No. |
Component |
Function |
|
1. |
ECM (Engine Control Module) |
Transmits the following signals to the combination meter via CAN communication line:
Refer to Component Location (with VQ40DE) or Component Location (with VK56VD) for detailed component location. |
|
2. |
IPDM E/R (Intelligent Power Distribution Module Engine Room) |
IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch signal to the combination meter via BCM through CAN communication line. Refer to Component Location for detailed component location. |
|
3. |
Combination meter |
Refer to System Description . |
|
4. |
Fuel level sensor unit and fuel pump (fuel level sensor) |
Transmits the fuel level sensor signal to the combination meter. |
|
5. |
ABS actuator and electric unit (control unit) |
Transmits the vehicle speed signal to the combination meter via CAN communication line. Refer to Component Location for detailed component location. |
|
6. |
Engine oil pressure sensor (with VK56VD) |
Transmits the engine oil pressure sensor signal to the ECM. |
|
7. |
Oil pressure switch (with VQ40DE) |
Detects the engine oil pressure and transmits the oil pressure switch signal to the IPDM E/R. |
|
8. |
A/T assembly (with 5AT) |
|
|
9. |
A/T assembly (with 7AT) |
|
|
10. |
BCM (Body Control Module) |
Refer to Component Location for detailed component location. |
|
11. |
Low tire pressure warning control unit |
Refer to Low Tire Pressure Warning Control Unit . |
|
12. |
Tow mode switch (if equipped) |
Transmits the tow mode switch signal to the combination meter. |
|
13. |
Parking brake switch |
Transmits the parking brake switch signal to the combination meter. |
|
14. |
Washer fluid level switch (if equipped) |
Transmits the washer fluid level signal to the combination meter. |
|
15. |
Seat belt buckle switch LH (RH similar) |
Transmits the seat belt buckle switch signal to the combination meter. |