Diagnosis Procedure

Transmits the parking brake switch signal to the combination meter.

1. CHECK PARKING BRAKE SWITCH CIRCUIT 
   1. Disconnect combination meter connector and parking brake switch connector.
   2. Check continuity between combination meter harness connector and parking brake switch harness connector.

      Combination meter		Parking brake switch		Continuity
      Connector	Terminal	Connector	Terminal
      M23	33	M11	1	Yes

   3. Check continuity between combination meter harness connector and ground.

      Combination meter		--	Continuity
      Connector	Terminal
      M23	33	Ground	No

   Is the inspection result normal?

   YES

   Inspection End.

   NO

   Repair harness or connector.