Battery Disconnect: Installation
Installation is in the reverse order of removal.
CAUTION:
Replace the fusible link box (battery) if it has been dropped or sustained an impact.
To install the battery, carefully read the following instructions:
- To prevent damage to the parts, connect the battery cable to the positive terminal first.
- After connecting battery cables, to securely supply battery voltage, ensure battery cables are tightly clamped to battery terminals for good contact.
- To securely supply battery voltage, check battery terminal for poor connection caused by corrosion.
- Perform ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL. Refer to After Work Procedure .
|
Battery terminal nuts |
5.5 N.m (0.56 kg-m, 49 in-lb) |