Diagnosis Procedure

1. Perform distance sensor alignment. Refer to Description .
2. Erase all "Self Diagnostic Result" with CONSULT.
3. Perform "All DTC Reading" with CONSULT.
4. Check if the "C1A18-54" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

Check if any DTC other than "C1A18-54" is detected in "Self Diagnostic Result" of "LASER/RADAR".

Is "C1A18-54" detected?

YES

replace the distance sensor. Refer to Removal and Installation .

NO

INSPECTION END