DTC Confirmation Procedure

If DTC "U0126-82" is displayed with DTC "U1000-01", first diagnose the DTC "U1000-01".

Is applicable DTC detected?

YES

Perform diagnosis of applicable. Refer to DTC Description .

NO

GO TO  2.

1. Start the engine.
2. Turn the AEB system ON.
3. Perform "All DTC Reading" with CONSULT.
4. Check if the "U0126-82" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

Is "U0126-82" detected as the current malfunction?

YES

Refer to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: INSPECTION END