DTC Confirmation Procedure

Check if "U1000-01" is also detected with "C1A17-48" in "Self Diagnostic Result" of "LASER/RADAR".

Is "U1000-01" detected?

YES

Perform diagnosis of applicable. Refer to DTC Description .

NO

GO TO  2.

1. Start the engine.
2. Perform "All DTC Reading" with CONSULT.
3. Check if the "C1A17-48" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

Is "C1A17-48" detected as the current malfunction?

YES

Refer to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: Inspection End.