LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2020 >> Versa SR >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Automatic Emergency Braking (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C1A17-46: Distance Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. CHECK DISTANCE SENSOR SELF-DIAGNOSIS RESULTS 

    Check if "U1000-01" is also detected with "C1A17-46" in "Self Diagnostic Result" of "LASER/RADAR".

    Is "U1000-01" detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO  2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "C1A17-46" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

    Is "C1A17-46" detected as the current malfunction?

    YES

    Refer to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.