LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2020 >> Versa SR >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Automatic Emergency Braking (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C1A03-64: Vehicle Speed Sensor >> Confirmation Procedure

Confirmation Procedure

  1. CHECK DTC PRIORITY 

    If DTC "C1A03-64" is displayed with DTC "U1000-01" or "C1A04-97", first diagnose the DTC "U1000-01" or "C1A04-97".

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable.

    NO

    GO TO  2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Turn the Automatic Emergency Braking system ON.
    3. Drive the vehicle at 30 km/h (19 MPH) or more
    4. Perform "All DTC Reading" with CONSULT.
    5. Check if the "C1A03-64" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

    Is "C1A03-64" detected as the current malfunction?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END